Roll over image to zoom in
BDK PolyPro Car Seat Covers Full Set in Charcoal on Black
$27.90
Description
Add A Layer of Comfort & Protection – Package Includes Seat Covers for Front Driver & Passenger Seats, Rear Bench Cover. Premium “Rome” Cloth Material – Feels Like Neoprene. Made for seats w/ Detachable Headrests. Double Stitched Seams – Toughest, Durable & Long Lasting. 100% Washable – Breathable Cloth Prevents Odors and Dirt Build Up.
Specification
Additional information
| Asin | B01FKQVZOS |
|---|---|
| Dimensions | 12 x 9 x 5 inches |
| Weight | 2.42 pounds |
| Manufacturer | BDK |
by Debbie
The headrest covers do not fit, the material is very wrinkled and since it doesn’t fit my car seats they can’t be pulled taut to take the wrinkles out. Very disappointed but until I can save enough money to buy other ones these will have to do. Buyer beware there is no such thing as universal covers. Buy specific to your vehicle.
by Jose23
Appearance looks great gives my old 1997 Toyota Camry a new custom look. Durability could had been better you can’t pull or stretch too much because you can hear it ripping if you do. Size was a exact fit for the two front seats, but for the rear seat would had been an exact fit if they would had done the slot for the rear seat arm rest a little better for a 97 Toyota Camry, so I still installed it just I have no access to the rear seat arm rest if I don’t want the factory seat to show when I unzip the zipper the rear seat cover comes with, and would had been perfect if the rear seat covers came already with the seat beat buckle holes made, you have to cut it yourself if you want access to rear seat belts. Other than that covers all the factory seats enough so you can’t tell those are only seats covers, but for the price I can’t complain beats paying thousands for custom made seats when I only paid $30 for these seat covers and it made my Camry look like the seats are custom made, I love the black and red on the seat covers matches my Camry red exterior paint. Over all I’m satisfied with my purchase thank you
by Carol
Installing the front covers is easy, with the exception of the strap that’s supposed to go under the seat, side-to-side. I have a 2017 RAV4 and there is no space for that strap to go unless it’s under the entire seat, which will then cover the recliner handle. Also, the fit it not very tight on the bottom of the seat, but is tight across the back of the seat. However, it covers up the pocket on the back of the front seats. Annoying, but not life altering. At least the back is a slip on without and annoying clips or loops. Putting a slit in would be a very easy upgrade so you could use the pocket! Now, the back seat cover is another thing altogether. I didn’t even attempt putting it on. It’s 2 pieces, which allows dirt and crap to fall between and into the crack of the seat. Why cover something up only to have to clean under it later? Also, there are 100 little stretchy loops to add clips to to keep the seat cover tight. I DO NOT want to spend an hour doing that when it really isn’t designed to keep everything out and off the seats! Those pieces are already in the garbage. Also, the headrest covers are all the same size so don’t fit the smaller headrest in the middle o the back seat. I bought this used so it was cheap. The person who bought it before me only took the backseat covers out, saw what a nightmare it was and shoved it back in the box and returned it. They didn’t even look at the front covers! Had I paid more, I would return it. But really, I didn’t want the back seat cover anyway. I already have one that is one piece, is easy to put in and take out and works just fine.
by SEP
First of all, I want to say that now that they are installed, they look very nice. I have a 2013 Kia Sorento. My biggest complaint is that there were no proper instructions, just one sheet of paper with some confusing pictures that didn’t help much. I had to come back to the video here on Amazon to see how to install them and even then, we were just winging it, hooking things here and there, wherever we could. Oh, and when I opened the box, the knife cut the top cover of the back seat cover as there was nothing between the box and the fabric of the seat cover, so buyer beware! I can’t attest to the durability or the value for my money because, honestly, I just installed them yesterday, and no one has been in my back seat to test them. (I’ll come back in a few months and let you know.) Installing the front bucket seats were easy enough, however, the seat covers do hide the mesh pockets that are behind my front bucket seats. But, other than that, they fit very well in the front. I kept trying to take off my headrests, and in my Kia, they do not come out. I realized later that they don’t need to, as there is a hole that opens large enough to get over the headrests for the front bucket seat covers. Only the back middle headrest was removable, so we had to just fit the cover around the other backseat headrest poles. Also, it was very difficult to hook the straps under and around the back seats. A small person with very small arms may have less of a struggle than we did, but we did manage to get it done. Overall, (THUS FAR) we are satisfied with the seat covers. Honestly, I don’t know how our back seats got so filthy, so anything is an improvement! I’m not looking forward to the day whenever I’m going to need to put one section of my backseat down for a load of something, but there are zippers that I can undo to be able to accomplish that. I just know it’s going to be a little bit of a hassle, but it’ll be worth it if they are durable and a good value for the money. We’ll see. I’ll let you know.
by Amazon Customer
I just bought the seat covers looks great , it was easy to fit the front seats but the back seat it is a struggle but they just fitted fine , overall it is worth the price , also it is as prime shipping which came same day , mine was Honda crv 2016 , would definitely recommend for the price
by Cheetahkill1
installing the front seats area breeze. the back seat??? Nightmare, they give you like these pins to stick INTO your car.just to hold the bottom down. the are for your back, is another part, and you have to use more of the pins to hold them down. Then they ask you to cut holes where the seat belts go and connect too. Look somewhere else.
by Daisy
Overall I like the product. Only downside to it was, it arrived with a oil spill on it. It came with a stain on it.
by MARTHA
For the price really nice
by CMB_FurMomSC
First off, I did not end up using the clips. I mainly have the trunk down because I am a fur-mom x2 (no 2 legged children); except for the neighborhood kids I take to church on Wednesday and Sunday, then the seats are back up in the sitting position.
Back to the clips! Seeing as I have the seats down and pups in the back (American Staffordshire Terrier and Blue nose pit) I didn’t want them walking on them, so they don’t hurt the paws or snag on the felt interior. Also, the last picture I put a trunk cover down and didn’t want that torn.
For the non-dog car rider people these clips go at the end of the elastic and it was tough for me to pull the elastic under the crevice of the seat and trunk then stretch and clip. One end is the loop the other is like a tighter L-shape and I would use pliers and close them into each other to fasten more securely. The clips work but not sure how long it will stay and not pup moving the seat from up to down position. Therefore, I secured mine with zip ties! They seem to fix it all just like electrical tape! j/k. The zip ties wont hurt the pups paws; I could give it more slack in the stretch attachments that come on the seat covers and it doesn’t feel so tight that it is gonna rip them.
To be honest; that was my hardest part. Getting the backseat part on and then making sure they were nice and snug around the back part. Oh, and the front seats have a velcro snap to secure under the seat. Have to go under both sides of seats and feed them through the seat adjuster then velcro it.
The part about removing the headrest and cutting small holes to fit the headrest back over and also cut holes for the seatbelt snaps was easy. For the head rest cut a small pinch out about the size of a dime and that is perfect to fit it nicely. The seat belts about the size of a quarter and you can wiggle them through and if it gets too tough just cut a tad bit more and they fit nice.
My front seats look a little baggy in the picture because I have arm rest on my seats. I am going to got back and do the same like the headrest. I will remove the arm rest; pull the car seat cover into place taunt and then cut a small hole and put the arm rest back on. I was just getting tired and the rain was coming. Otherwise you could just cut a vertical line long enough to slip around the arm rest bar and down to the bottom of seat but that could be a lot of material cut versus a small size dime hole like the headrest.
I also purchased the product for less than the NEW price. I picked the like new for about $13 dollars and they look brand new? I don’t know if it was because the box appeared opened then taped back but mine look brand new and had no cuts or tears in them. What a deal!
Item arrived quickly packaged nicely with no damage. Again, budget friendly for my fixed income disability budget. Seats are protected from dog hair and a quick spill of a drink if it happens. Got them in my favorite color too! Very pleased; would order again.
by Anonymous1460
I actually really like these seat covers despite the issues I ran into. Although the foam padding was torn in several spots underneath with will really make wear show over time since its torn to begin with and there was a really bad pull in 1 spot (photo included) of the material upon arrival, they still fit my front seats very nicely. It fit the bottom of the bench of my back seat but not the top because the headrests in my car aren’t removable. It wouldnt fit over the permanent headrest because that wouldve required more material to be able to stretch that far. So I am only using part of what I paid for which is unfortunate because amazon said it fit my make, model, and year of my car
Also, the directions for how to hook the hooks for the back seat were terrible. Way too generalized. A video tutorial would’ve been more helpful probably. Even without them fitting over the top, I tried to still make it work but with my 60/40 split, I couldn’t find a way to hook it in the back without it being so overly stretched to one side or the other.
I will have to attach more photos later.